Configuring a Lamp With 2 Switches
Series 1 lamp 2 switch configuration is intended to control lights from two locations are far apart. Application of series 1 lamp with 2 switches are often implemented in the hallway or tunnel. In the application in a hallway or tunnel, with a series like this we can turn on or turn off the light from each tunnel or hallway door. The number of lights can be reproduced by memparalelnya. The circuit is very simple because only built of 1 and 2 pieces of fruit lamp selector switch. If you want to use a lamp with a power greater then the switch can be replaced with 1 piece contactor (relay) for each switch. Then switch used to turn on and turn off the relay replacement S1 and S2.
Circuit configuration of a Lamp with 2 Switches
The working principle with 2 series 1 lamp switch is the light will lamp when the S1 and S2 different position, and the lamp will be on at the time of the switch position S1 and S2 together. In the installation of switches S1 and S2 each put at the end of the hallway or tunnel.