Sine Wave To TTL Converter Circuit

Monday, April 10th, 2017 - Digital

Sine wave to TTL converter circuit is a electronic schematic that we can use to change the sine wave signal with a pulse shape with the same frequency with TTL logic level that is ready to be used in encoding digital data. The schematic circuit of Sine Wave To TTL Converter can be used to convert sine wave signal to form a TTL of frequency 100KHz to 80MHz at the level of 100mV – 2V. The series of Sine Wave To TTL Converter uses 5VDC voltage source. The schematic circuit of Sine Wave To TTL Converter was built from transistor T1 gets base bias from R3, R4 and R5. If the schematic circuit Sine Wave Converter This TTL To get the input sine signal with a minimum level of 100mV, the circuit Sine Wave To TTL Converter This will generate an output signal with TTL level square wave.

Sine Wave To TTL Converter Circuit

Converter Sine  Wave To TTLSchematic Circuit Of Converter Sine  Wave To TTL

The schematic circuit of Sine Wave To TTL Converter has input + impedance – 50 Ohm which is set using the R6. To change the value of the input impedance converter circuit Sine Wave To this TTL can be set via the R6 with a maximum value of 300 ohms.

You may also like, related articles Sine Wave To TTL Converter Circuit