Voltage Polarity Tester

Thursday, March 9th, 2017 - Electronic Tools

Voltage polarity tester is a simple device that serves to determine the polarity of the voltage of the wiring. Circuit voltage polarity tester is made with 4 pieces diodes, 2 LEDs and a resistor. Technically, the working principle of the circuit tester utilizes a forward bias on the diode D4, D5, D6 and D7, then forwards it to the LED bias fordward D1 and D2. Circuit voltage polarity tester is quite simple and requires no external voltage source.

Circuit Voltage Polarity Tester

Voltage polarity tester, test the voltage polarity, knowing the voltage polarity, the tester is simple, the tool checks the polarity of the voltage, poraity tester, the circuit polarity tester, test the wiring, the DC circuit tester, the tester power lines, electrical wiring tester, tester DC circuit, the circuit polarity tester, voltage polarity, the polarity of the DC voltage

Parts List Voltage Polarity Tester

  • D1, D2 = LED
  • D3, D4, D5, D6 = 1N4001
  • R1 = 1K

Technique Using Voltage Polarity Tester

  • If LED D1 and LED D2 lights extinguished, then the line or cable at the probe 1 is positive and the line or cable to the probe 2 is negative.
  • If LED D1 and LED D2 lights extinguished, then the line or cable at the probe 1 is negative and line or cable at the probe 2 is positive.
  • And If both LEDs D1 and D2 is on the path that the test is an AC line
  • Voltage polarity tester is only safe to use for the object under test circuit in 12volt. If you want to use this voltage polarity tester for a test object with a voltage above 12 volts the value of R1 should be replaced with a larger value.

You may also like, related articles Voltage Polarity Tester