Water Level Control RS-Flop Fliop

Saturday, February 11th, 2017 - Electronic Hobby

Water level control is a tool that serves to control the height of the water level in a reservoir or cistern. Water level control circuit is made of the RS flip-flop of NAND gate. NAND gate G1, G2 and G3 is IC CD4011 is configured as an RS flip-flop. The series of water level control can monitor the water level elevation in a tub on the basis of logic earned on the path to the sensor threshold and Trigger are in pairs on the water bath. Sensor threshold function to monitor the highest point of water is allowed then triggers the sensor serves as the minimum allowable water.

Circuit Of Water Level Control RS-Flop Fliop

water level control, automatic water level control, water level sensors, water level sensors, water level control circuit, water level controller, liquid level controllers, liquid level sensors, automatic control of water tanks, water level control circuit, the circuit automatically controls the water level

This series of water level control will monitor water in the tub, when the water in the minimum conditions and the sensor triggers and high-threshold logic circuits will turn on all the water pump (via relay) to fill the water in the tub. Then when the water touches the sensor threshold so that the sensor threshold and low logic triger all the water pump is turned off via a relay and water filling stop.

You may also like, related articles Water Level Control RS-Flop Fliop