Analog to Digital Convertion ADC AVR ATMega

Sunday, March 28th, 2021 - Digital

The ATmega8535 features a 10-bit successive approximation ADC. The ADC is connected to an 8-channel Analog Multiplexer which allows eight single-ended voltage inputs constructed from the pins of Port A. The single-ended voltage inputs refer to 0V (GND). The device also supports 16 differential voltage input combinations. Two of the differential inputs (ADC1, ADC0 and ADC3, ADC2) are equipped with a programmable gain stage, providing amplification steps of 0 dB (1x), 20 dB (10x), or 46 dB (200x) on the differential input voltage before the A/D conversion. Seven differential analog input channels share a common negative terminal (ADC1), while any other ADC input can be selected as the positive input terminal. If 1x or 10x gain is used, 8-bit resolution can be expected. If 200x gain is used, 7-bit resolution can be expected. The ADC contains a Sample and Hold circuit which ensures that the input voltage to the ADC is held at a constant level during conversion. A block diagram of the ADC is shown in Figure 98. The ADC has a separate analog supply voltage pin, AVCC. AVCC must not differ more than ±0.3V from VCC. See the paragraph “ADC Noise Canceler” on page 214 on how to connect this pin. Internal reference voltages of nominally 2.56V or AVCC are provided On-chip. The voltage reference may be externally decoupled at the AREF pin by a capacitor for better noise performance.

Feature Of Analog-to-Digital Converter

  • 10-bit Resolution
  • 0.5 LSB Integral Non-linearity
  • ±2 LSB Absolute Accuracy
  • 65 – 260 μs Conversion Time
  • Up to 15 kSPS at Maximum Resolution
  • 8 Multiplexed Single Ended Input Channels
  • 7 Differential Input Channels
  • 2 Differential Input Channels with Optional Gain of 10x and 200x(1)
  • Optional Left Adjustment for ADC Result Readout
  • 0 – VCC ADC Input Voltage Range
  • Selectable 2.56V ADC Reference Voltage
  • Free Running or Single Conversion Mode
  • ADC Start Conversion by Auto Triggering on Interrupt Sources
  • Interrupt on ADC Conversion Complete
  • Sleep Mode Noise Canceler

Analog-to-Digital Converter Block Schematic

ADC AVR ATMega,ADC AVR ATMega,ADC ATMegaBlock diagram Of Analog to Digital Convertion ADC AVR ATMega

You may also like, related articles Analog to Digital Convertion ADC AVR ATMega